Deep Drop Weight Mold Starter Kit
Start making your own variable deep drop weights with the Starter Kit. The kit includes all molds and accessories needed to make variable deep drop lead weights (lead not included). Each split mold has a single cavity and can be used to create as many weight segments as needed. To assemble the weight, simply screw segments together until the desired weight is achieved. The brass eye installed in the tail segment is used to connect to the fishing line. The weight system allows you to use as small as a 1.5 pound weight up to a 12 pound weight in 1.5 pound increments.
Includes:
One End and one Center Mold
Three full inserts and two half inserts
One #3 and one downrigger brass wire eye
All required hardware
Makes 3 center weights, 1 nose weight, and 1 tail weight for a total of 7.5 pounds.
Additional brass wire eyes will need to purchased directly from Do-it Molds to make additional tail weights.
Does not include lead.
Start making your own variable deep drop weights with the Starter Kit. The kit includes all molds and accessories needed to make variable deep drop lead weights (lead not included). Each split mold has a single cavity and can be used to create as many weight segments as needed. To assemble the weight, simply screw segments together until the desired weight is achieved. The brass eye installed in the tail segment is used to connect to the fishing line. The weight system allows you to use as small as a 1.5 pound weight up to a 12 pound weight in 1.5 pound increments.
Includes:
One End and one Center Mold
Three full inserts and two half inserts
One #3 and one downrigger brass wire eye
All required hardware
Makes 3 center weights, 1 nose weight, and 1 tail weight for a total of 7.5 pounds.
Additional brass wire eyes will need to purchased directly from Do-it Molds to make additional tail weights.
Does not include lead.
Start making your own variable deep drop weights with the Starter Kit. The kit includes all molds and accessories needed to make variable deep drop lead weights (lead not included). Each split mold has a single cavity and can be used to create as many weight segments as needed. To assemble the weight, simply screw segments together until the desired weight is achieved. The brass eye installed in the tail segment is used to connect to the fishing line. The weight system allows you to use as small as a 1.5 pound weight up to a 12 pound weight in 1.5 pound increments.
Includes:
One End and one Center Mold
Three full inserts and two half inserts
One #3 and one downrigger brass wire eye
All required hardware
Makes 3 center weights, 1 nose weight, and 1 tail weight for a total of 7.5 pounds.
Additional brass wire eyes will need to purchased directly from Do-it Molds to make additional tail weights.
Does not include lead.
Downloads
Features
Molds and inserts are aluminum
Each mold makes one 1.5 pound weight
Accepts #3 or Downrigger Do-it brass wire eyes
Stainless steel alignment pins minimize flashing
Sprue and riser twist off
Stainless steel hardware
Only a small melting pot is required